Cost guide

    Wet room cost in Glasgow

    Real installed prices for Glasgow homes, broken down by room size, floor type and specification — with the cost of the parts you cannot see once the tiles are on.

    How much does a wet room cost in Glasgow?

    A wet room in Glasgow costs £5,000 to £12,000 fully installed. Room size, floor structure and the level of fittings decide where in that range a job lands, and tanking plus drainage typically account for 20–30% of the total.

    Price by build

    Typical Glasgow wet room prices

    Prices are supplied-and-fitted, including strip-out, waste disposal, full-floor tanking, drainage, tiling and fit-out. They exclude structural alterations and building warrant fees.

    Wet room buildTypical Glasgow cost
    Compact wet room (under 4m², solid floor)£5,000 – £7,000
    Standard family wet room (4–6m²)£7,000 – £9,500
    Timber-floor or tenement wet room£8,500 – £12,000
    Accessible / adapted wet room£6,500 – £11,000
    Large or premium wet room (6m²+)£11,000 – £16,000

    Figures reflect typical Glasgow installation pricing for 2026 and are guide ranges, not quotes. Your written quote is priced from a survey of your actual room.

    Where the money goes

    What you are actually paying for

    Tanking and floor preparation — roughly 20–30%

    The bonded membrane, reinforcing tape, primer, former or screed and the labour to install them. This is the part of the job that stops water reaching the structure. It is also the part most easily cut from a cheap quote, because nobody can see it after tiling.

    Drainage — roughly 10–15%

    The drain body, trap, and the pipework run to the existing stack. A linear drain against a wall costs more than a centre gully but produces a single-direction fall that is easier to tile and more comfortable to stand on.

    Tiling — roughly 20–25%

    Labour plus materials. Small mosaics in the shower zone need more cuts and more grout lines, so they cost more to lay and more to clean, though they follow falls more easily than large-format tiles.

    Sanitaryware, brassware and screens — roughly 20–30%

    The widest-varying element. A thermostatic mixer, screen, WC and basin can be specified at £900 or £4,500 for the same room, which is why two quotes for identical work can look very different.

    Extraction, electrics and heating — roughly 5–10%

    Sized extraction with overrun, any lighting alterations, and electric underfloor heating where it is specified. In a Glasgow wet room, extraction is a functional requirement rather than an upgrade.

    Cost drivers

    What pushes a Glasgow wet room quote up

    • Moving the drain away from the existing waste position, which means new pipe runs and often ceiling access below.
    • Suspended timber floors that need the deck rebuilt and joists assessed before falls can be formed.
    • Upper-floor tenement flats where access, parking and stair carrying add labour time.
    • Underfloor heating, which adds material cost and a build-up depth the floor has to accommodate.
    • Natural stone or small mosaic tiling, which multiplies labour hours over large-format porcelain.
    • Structural alterations, such as removing a stud wall, which may also trigger a building warrant.
    Value

    Where saving money costs more later

    Every wet room failure we are called to repair traces back to one of three shortcuts: partial tanking, inadequate falls, or a drain sized and positioned for convenience rather than flow. Repairing any of them means lifting the tiles, which means paying for the finish twice.

    Save on the visible layer instead. Porcelain instead of stone, a fixed screen instead of a bespoke one, and keeping the WC and basin positions where they are will take real money off a quote without touching the waterproofing. See how tanking is specified.

    Common questions

    Wet room cost questions

    A wet room in Glasgow costs £5,000 to £12,000 fully installed. A small level-access conversion on a solid floor with mid-range fittings sits around £5,000 to £7,000, a standard family wet room around £7,000 to £9,500, and a large or tenement installation with a timber floor rebuild and premium fittings £9,500 to £12,000 or more.

    A wet room is usually more expensive than a like-for-like bathroom refit. The extra cost comes from tanking the full floor, forming falls, and the drainage work, which a standard bathroom with a shower tray does not require.

    The cheapest sound wet room keeps the drain in the existing waste position, uses a solid floor where one exists, uses a prefabricated sloping former rather than a screeded fall, and specifies large-format porcelain tiles that cut labour time. Reducing the tanking specification is not a saving, because a failed membrane costs more than the original job.

    Wet room quotes vary because the waterproofing and floor work are invisible in the finished room. Two quotes for the same room can differ by thousands where one includes full-floor bonded tanking and a rebuilt deck and the other includes a painted-on sealer around the shower corner only.

    A wet room needs the same routine cleaning as any tiled bathroom, plus an annual check of the silicone junctions and the drain trap. The tanking itself is maintenance-free once installed correctly.

    Want a real number for your room?

    Send us the room dimensions and floor type and we will come back with an itemised written quote.